Our range of Replacement Rear Step Towbars are vehicle specific and there's one to suit most popular 4WD models. Each model is rated and tested to comply with the National Australian Testing Authorities procedures. This particular model has no swivel points as the spare wheel is mounted to the door.

They're made from steel, then zinc-plated and powder coated. A process that gives them durability, longevity and strength, so they're tough and functional. Kaymar's rear bar is bolted on to the back of your 4WD, mounted to your chassis. It also provides you and your family with added protection from rear impacts. This rear bar has no swivel mounts and has a towing capacity of 2500KG and a ball download of 250KG.

Note* Warranty is void if a non Kaymar hitch is used in the Kaymar towbar

A definite asset to your 4WD. Our range of Replacement Rear Step Towbars are vehicle specific and there's one to suit most popular 4WD models. Each unit is rated and tested to comply with the National Australian Testing Authorities rules.

The Nissan GQ bar is available with a right-hand side and/or left-hand side pivot point, which allows the fitment of a right-hand Spare Wheel Carrier and Left-hand side Jerry Can Holder. This Replacement Rear Step Towbar is compatible with ARB's jack mount, permitting safe, secure raising of the vehicles rear. Lighting systems on the Replacement Rear Step Towbar use either your original vehicle lights or after market lights, which comply with current Australian Design Rules requirements.

Note* Warranty is void if a non Kaymar hitch is used in the Kaymar towbar

These rear bars are designed vehicle-specific, with a towing capacity of 2500kg and a ball download of 250kg.

They're made from steel, then zinc-plated and powder coated. A process that gives them durability, longevity and strength, so they're tough and functional. These rear bars simply bolt on to the back of your 4WD, mounted to the chassis. It also gives you, your vehicle and its occupants added protection from rear impacts.
 

The Replacement Rear Step Towbar is bolted to your chassis, which assists your doors in always closing properly as there is no unnecessary weight on the door or rubber seals. The carrier is then mounted to this. Then you're able to fit extra accessories to the carrier. For all the options, check the accessories to the spare wheel carrier page.

Note* Warranty is void if a non Kaymar hitch is used in the Kaymar towbar

This robust Spare Wheel Carrier pivots on sealed taper bearings, for smooth use and minimum maintenance. And it's so simple to use. The manual lock-open system prevents the carrier swinging closed when the vehicle is on uneven ground. There is a pin on a wire that you manually place in a holder to keep the carrier open and then manually remove from holder to close.
 

This Swing Away Jerry Can Holder is simple to use with an automatic lock-open mechanism to prevent the carrier swinging , no matter what angle your vehicle is on. When closed, it locks securely in place with our efficient, easy-to-use, over-centre, manual locking system. Available in the left-hand side only, it's made from steel, which is then powder coated It also comes with a plastic covered metal cable, crimped on one side, with provision for a padlock, sold separately, on the other side. This keeps your jerry can secure even in the roughest going. Pictured on the Toyota Land Cruiser 80 Series.