Say goodbye to lying underneath your vehicle, on all sorts of uncomfortable surfaces, struggling to extract the spare wheel. Kaymar's range of carriers put your spare wheel precisely where it should be for easy access... on the back of your vehicle.

Our Standard Bar Spare Tyre Carrier mounts directly to the chassis, over your existing bumper. This robust Spare Wheel Carrier pivots on sealed taper bearings, for a smooth swing and minimum maintenance. It's simple to use too. The automatic lock-open mechanism prevents the carrier swinging closed when the vehicle is on uneven ground. When closed, it locks securely in place, with Kaymar's efficient, easy-to-use, over-centre, manual locking system.

A definite asset to your 4WD. Our range of Replacement Rear Step Towbars are vehicle specific and there's one to suit most popular 4WD models. Each model is a rated and tested towbar at 3500kg and 350kg ball load in accordance with the National Australia Testing Authorities testing procedures.

The Toyota 100 series bar is available with a right-hand-side and left-hand-side pivot point, allowing for fitment of a double spare wheel carrier, or single Spare Wheel Carrier and/or Jerry Can Holder. Kaymar's Replacement Rear Step Towbars are compatible with ARB's jack mount, permitting safe, secure raising of the vehicle's rear. Lighting systems on our unit use either your original vehicle, or after-market lights, which comply with current Australian Design Rules requirements.

Note* Warranty is void if a non Kaymar hitch is used in the Kaymar towbar

The Toyota 100 series rear bar design is vehicle-specific, with a towing capacity of 3500KG and a ball download of 350KG.

They're made from steel, then zinc-plated and powder coated. A process that gives them durability, longevity and strength, so they're tough and functional. The Replacement Rear Step Towbar simply bolts on to the back of your 4WD, mounted to the chassis. It also gives you, your family and it's occupants added protection from rear impacts.
 

The Replacement Rear Step Towbar is bolted to your chassis, which assists your doors in always closing properly as there is no unnecessary weight on the door or rubber seals. The carrier is then mounted to this. Then you're able to fit extra accessories to the carrier. For all the options, check the accessories to the spare wheel carrier page.

Note* Warranty is void if a non Kaymar hitch is used in the Kaymar towbar

This robust Spare Wheel Carrier pivots on sealed taper bearings, for smooth use and minimum maintenance. And it's so simple to use. The automatic lock-open system prevents the carrier swinging closed when the vehicle is on uneven ground. In the closed position, it locks securely in place with our efficient, easy-to-use, over-centre, manual locking system.
 

This Swing Away Jerry Can Holder is simple to use with an automatic lock-open mechanism to prevent the carrier swinging , no matter what angle your vehicle is on. When closed, it locks securely in place with our efficient, easy-to-use, over-centre, manual locking system. Available in the left-hand side only, it's made from steel, which is then powder coated It also comes with a plastic covered metal cable, crimped on one side, with provision for a padlock, sold separately, on the other side. This keeps your jerry can secure even in the roughest going.

Kaymar's range of Replacement Rear Step Tow bars are a definite advantage to your 4WD, because this enables multiple options of mountable accessories to the rear bar. Dual Spare Tyre Carriers are available for the Land Cruiser, which leaves more room in your roof racks for other necessary equipment.