A definite asset to your 4WD is Kaymar's range of Replacement Rear Step Towbars. These rear bars are vehicle specific and suit all the most popular 4WD models. Each unit is a rated and tested towbar in accordance with the National Australia Testing Authorities testing procedures.

The Toyota 40 series bar is available with a right-hand-side and left-hand-side pivot point, which allows the fitment of a Spare Wheel Carrier, Jerry Can Holder or two Spare Wheel Carriers. These Replacement Rear Step Towbars are compatible with ARB's jack mount, permitting safe, secure raising of the vehicles rear. Lighting systems on the Replacement Rear Step Towbar use either your original vehicle lights or after market lights, which comply with current Australian Design Rules requirements.

Note* Warranty is void if a non Kaymar hitch is used in the Kaymar towbar

These rear bars designs are vehicle-specific, with a towing capacity of 2000KG and a ball download of 120KG.

Made from steel then zinc-plated and powder coated. A process that gives them durability, longevity and strength, so they're tough and functional. The Kaymar rear bar bolts on to the back of your 4WD, mounted to your chassis. It also gives you, your vehicle and its occupants added protection from rear impacts.
 

The Replacement Rear Step Towbar is bolted to your chassis and the carrier is then mounted to this, which assists your doors in always closing properly as there is no unnecessary weight on the door or rubber seals. Once mounted, the spare wheel carrier gives you the ability to mount additional accessories on it. For all the options, check out the accessories to the spare wheel carrier page.

Note* Warranty is void if a non Kaymar hitch is used in the Kaymar towbar

This robust Spare Wheel Carrier pivots on sealed taper bearings, for smooth use and minimum maintenance. And it's so simple to use. The automatic lock-open system prevents the carrier swinging closed when the vehicle is on uneven ground. In the closed position, it locks securely in place with our efficient, easy-to-use, over-centre, manual locking system.
 

This Swing Away Jerry Can Holder is simple to use. It has an automatic lock-open mechanism, to prevent the carrier swinging, no matter what angle your vehicle is on.

When closed, it locks securely in place with our efficient, easy-to-use, over-centre, manual locking system. Available for the right-hand side only, this holder is made from steel, which is then powder coated. It also comes with a plastic covered metal cable, crimped on one side, with provision for a padlock, sold separately, on the other side. This keeps your jerry can secure even in the roughest going.
 

Kaymar's range of Replacement Rear Step Towbars are a definite advantage to your 4WD, because this enables you have multiple options of mountable accessories to the rear bar. Dual Spare Wheel Carriers are available on the Toyota 40 series, which leaves you more room in your roof racks for other necessary accessories.

Pictured on the Toyota 100 Series.