 |
REPLACEMENT REAR STEP
TOW BAR |
 |
TOW BAR AND HITCH |
 |
SPARE TYRE CARRIER FOR
REPLACEMENT REAR STEP TOW BAR |
 |
AUTOMATIC LOCK-OPEN MECHANISM
ON KAYMAR SWING-AWAY ARM |
|
|
|
REPLACEMENT
REAR STEP TOW BAR |
|
A definite asset to your
4WD. Kaymar's range of Replacement Rear Step Towbars are vehicle
specific and there's one to suit all the most popular 4WD models.
Each unit is a rated and tested towbar in accordance with the
National Australia Testing Authorities testing procedures.
The Toyota 4 Runner bar is available with a left-hand-side pivot
point only, which allows for the fitment of a Spare Wheel Carrier.
These Replacement Rear Step Towbars are compatible with ARB's jack
mount, allowing for safe, secure raising of the vehicles rear.
Lighting systems on the Replacement Rear Step Towbar use either your
original vehicle lights or after market lights, which comply with
current Australian Design Rules requirements.
Note* Warranty is void if a non Kaymar hitch is used in the Kaymar
towbar |
 |
|
TOW
BAR AND HITCH |
|
These rear bar designs
are vehicle-specific, with a towing capacity of 1500KG and a ball
download of 100KG.
They're made from steel, then zinc-plated and powder coated. A
process that gives them durability, longevity and strength, so
they're tough and functional. The Kaymar rear bar bolts on to the
back of your 4WD, mounted to your chassis. It also gives you, your
vehicle and its occupants added protection from rear impacts.
|
 |
|
SPARE
TYRE CARRIER FOR REPLACEMENT REAR STEP TOW BAR |
|
The Replacement Rear
Step Towbar is bolted to your chassis and the carrier is then
mounted to this, which assists your doors in always closing properly
as there is no unnecessary weight on the door or rubber seals. Once
mounted, the spare wheel carrier gives you the ability to mount
additional accessories on it. For all the options, check out the
accessories to the spare wheel carrier page.
Note* Warranty is void if a non Kaymar hitch is used in the Kaymar
towbar |
 |
|
AUTOMATIC
LOCK-OPEN MECHANISM ON KAYMAR SWING-AWAY ARM |
|
This robust Spare Wheel
Carrier pivots on sealed taper bearings, for smooth use and minimum
maintenance. And it's so simple to use. The automatic lock-open
system prevents the carrier swinging closed when the vehicle is on
uneven ground. In the closed position, it locks securely in place
with our efficient, easy-to-use, over-centre, manual locking system.
|
 |
|
|
|
|
|