Each Toyota 75-78 series bar is available with a right-hand-side and/or left-hand-side pivot point, which allows for the fitment of a Spare Wheel Carrier, Jerry Can Holder or two Spare Wheel Carriers. These Replacement Rear Step Tow Bars are compatible with ARB's jack mount, permitting safe, secure raising of the vehicles rear. Lighting systems on the Replacement Rear Step Tow Bar use either your original vehicle lights or after market lights, which comply with current Australian Design Rules requirements.

Note* Warranty is void if a non Kaymar hitch is used in the Kaymar towbar

These rear bars are designed vehicle-specific with a towing capacity of 3500KG and a ball download of 350KG.

They're made from steel, then zinc-plated and powder coated. A process that gives them durability, longevity and strength, so they're tough and functional. These Kaymar rear bar simply bolts on to the back of your 4WD, mounted to your chassis. It also gives you, your vehicle and it's occupants added protection from rear impacts.
 

The Replacement Rear Step Tow Bar is bolted to your chassis, which assists your doors in always closing properly as there is no unnecessary weight on the door or rubber seals. The carrier is then mounted to this. Then you're able to fit extra accessories to the carrier. For all the options, check the accessories to the spare wheel carrier page.

Note* Warranty is void if a non Kaymar hitch is used in the Kaymar towbar

This robust Spare Wheel Carrier pivots on sealed taper bearings, for smooth use and minimum maintenance. And it's so simple to use. The automatic lock-open system prevents the carrier swinging closed when the vehicle is on uneven ground. In the closed position, it locks securely in place with our efficient, easy-to-use, over-centre, manual locking system.
 

This Swing Away Jerry Can Holder is simple to use with an automatic lock-open mechanism to prevent the carrier swinging , no matter what angle your vehicle is on. When closed, it locks securely in place with our efficient, easy-to-use, over-centre, manual locking system. Available in the left-hand side only, it's made from steel, which is then powder coated It also comes with a plastic covered metal cable, crimped on one side, with provision for a padlock, sold separately, on the other side. This keeps your jerry can secure even in the roughest going. Pictured on the Toyota Land Cruiser 80 Series.
 

Kaymar's range of Replacement Rear Step Towbars are a definite advantage to your 4WD, because they enable you to have multiple options in terms of mountable accessories to the rear bar. Dual Spare Wheel Carriers are available on Toyota 75/78 series, which leaves you more room in your roof racks for other necessary accessories.

Pictured on the Nissan GU Series.